SukuDokuWiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<code bash>
wget http://mirror.stanford.edu/yum/pub/centos/4.3/apt/i386/RPMS.os/yum-2.4.2-2.centos4.noarch.rpm

или с  http://mirror.centos.org/centos/3.4/os/i386/RedHat/RPMS/rpm-python-4.2.3-24_nonptl.i386.rpm

yum install gcc
yum install gcc-c++

wget http://easynews.dl.sourceforge.net/sourceforge/nagiosplug/nagios-plugins-1.4.3.tar.gz
tar zxf nagios-plugins-1.4.3.tar.gz
cd nagios-plugins-1.4.3
./configure
make
make install
make clean
cd ..
wget http://heanet.dl.sourceforge.net/sourceforge/nagios/nrpe-1.9.tar.gz
tar zxf nrpe-1.9.tar.gz
cd nrpe-1.9
./configure 
make 
cp src/nrpe /usr/sbin/
cp nrpe.cfg /etc/
vi /etc/nrpe.cfg
    allowed_hosts=193.192.247.9
    command[check_users]=/usr/local/nagios/libexec/check_users -w 5 -c 10
    command[check_load]=/usr/local/nagios/libexec/check_load -w 15,10,5 -c 30,25,20
    command[check_disk_root]=/usr/local/nagios/libexec/check_disk -w 7% -c 5% -p /dev/sda1
    command[check_disk_tmp]=/usr/local/nagios/libexec/check_disk -w 7% -c 5% -p /dev/sda3
    command[check_disk_vz]=/usr/local/nagios/libexec/check_disk -w 7% -c 5% -p /dev/sda4
    command[check_disk_vz2]=/usr/local/nagios/libexec/check_disk -w 7% -c 5% -p /dev/sdb1
    command[check_zombie_procs]=/usr/local/nagios/libexec/check_procs -w 5 -c 10 -s Z
    command[check_total_procs]=/usr/local/nagios/libexec/check_procs -w 150 -c 200
    command[check_swap]=/usr/local/nagios/libexec/check_swap -w 60% -c 30%


useradd nagios
nrpe -c /etc/nrpe.cfg --daemon
echo "nrpe -c /etc/nrpe.cfg --daemon" >> /etc/rc.local

pizzol: /usr/local/etc/nagios/servers # cat verbier.cfg | sed -e 's/verbier/troy/g' > troy.cfg

# /usr/local/etc/rc.d/nagios.sh restart
</code>
SukuDokuWiki

User Tools

Site Tools

Page Tools
