SukuDokuWiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<code bash>
# cd /usr/ports/net-mgmt/nagios-plugins 
# make -DWITH_MYSQL install clean
# cd /usr/ports/net-mgmt/nrpe
# make install clean
# echo 'nrpe_enable="YES"' >> /etc/rc.conf
# cp /usr/local/etc/nrpe.cfg-sample /usr/local/etc/nrpe.cfg
# ee /usr/local/etc/nrpe.cfg
    allowed_hosts=193.192.247.9
    
    command[check_users]=/usr/local/libexec/nagios/check_users -w 5 -c 10
    command[check_load]=/usr/local/libexec/nagios/check_load -w 15,10,5 -c 30,25,20
    command[check_disk_root]=/usr/local/libexec/nagios/check_disk -w 7% -c 5% -p /dev/da0s1a  !!! тут соответствующие разделы.
    command[check_disk_tmp]=/usr/local/libexec/nagios/check_disk -w 7% -c 5% -p /dev/da0s2d
    command[check_disk_home]=/usr/local/libexec/nagios/check_disk -w 7% -c 5% -p /dev/da0s3d
    command[check_disk_usr]=/usr/local/libexec/nagios/check_disk -w 7% -c 5% -p /dev/da0s1d
    command[check_disk_var]=/usr/local/libexec/nagios/check_disk -w 7% -c 5% -p /dev/da0s2e
    command[check_zombie_procs]=/usr/local/libexec/nagios/check_procs -w 5 -c 10 -s Z
    command[check_total_procs]=/usr/local/libexec/nagios/check_procs -w 150 -c 200
    command[check_swap]=/usr/local/libexec/nagios/check_swap -w 60% -c 30%
    command[check_mysql]=/usr/local/libexec/nagios/check_mysql

# ipfw add 111 allow tcp from 193.192.247.9 to 194.230.33.43 dst-port 5666
# ee /etc/rc.firewall
${fwcmd} add allow tcp from 193.192.247.9 to 194.230.33.43 dst-port 5666
   
# pw useradd nagios

# /usr/local/etc/rc.d/nrpe.sh start
____________________________________________________________________________
pizzol: /usr/local/etc/nagios/servers # cat verbier.cfg | sed -e 's/verbier/aletsch/g' > aletsch.cfg

pizzol # /usr/local/etc/rc.d/nagios.sh restart
</code>
SukuDokuWiki

User Tools

Site Tools

Page Tools
