SukuDokuWiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
=====format=====
<code>
fdisk -l /dev/sdc

Disk /dev/sdc: 4040 MB, 4040724480 bytes
125 heads, 62 sectors/track, 1018 cylinders
Units = cylinders of 7750 * 512 = 3968000 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xac78ac78

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *           1        1018     3944719    c  W95 FAT32 (LBA)
</code>
=====install grub2dos=====
<code bash>
wget http://download.gna.org/grub4dos/grub4dos-0.4.4.zip
unzip grub4dos-0.4.4.zip
./grub4dos-0.4.4/bootlace.com /dev/sdc
</code>
=====menu.lst=====
<code>
splashimage=(hd0,0)/Boot/tenerife.xpm.gz
timeout 30
default saved

title Boot from Disk C:
savedefault 1
map (hd1) (hd0)
map --hook
rootnoverify (hd0,0)
chainloader +1

title SystemRescueCd from hard-disk
savedefault 0
map --mem (hd0,0)/img/systemrescuecd-x86-1.6.3.iso (hd32)
map --hook
chainloader (hd32)
boot

title frenzy 1.3
savedefault 0
map --mem (hd0,0)/frenzy/frenzy1.3.iso (hd32)
map --hook
chainloader (hd32)
boot

title ----------------------------------------------------------------
root

title netinstall bsd/linux ==>
configfile (hd0,0)/Boot/NETINSTALL.LST


title Live CD ==>
configfile (hd0,0)/Boot/LIVE_CD.LST

title Recovery & test HDD ==>
configfile (hd0,0)/Boot/HDD.LST


title Recovery Console of Windows NT/2K/XP
find --set-root /cmdcons/setupldr.bin
chainloader /cmdcons/setupldr.bin
write 0x7C03 0x63646D63
write 0x7C07 0x00736E6F

title ----------------------------------------------------------------
root

title MemTest86+ v2.11
find --set-root /img/Memtest.img
map --mem /img/Memtest.img (fd0)
map --hook
chainloader (fd0)+1


title ----------------------------------------------------------------
root

title boot floppy
chainloader (fd0)+1
rootnoverify (fd0)
savedefault --wait=2

title boot CD
cdrom --init
map --hook
chainloader (cd0)

title Reboot
savedefault --wait=2
reboot

title ShutDown PC
halt

</code>
=====default=====
in order to get 'savedefault' feature working. we should create "default" file on the flash, 2048 bytes long:

<code>
cat default
0
#
#
#
#
#
#
#
#
#
#
# !!!!!!! The file size is 2048 bytes. Don't change the file size !!!!!!!
# XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
# XXXXXXXXXXXXXXXXXXXXX
# WARNING: If you want to edit this file directly, do not remove any line
# from this file, including this warning. XXXXXXXXXXXXXXXXXXXXXXXXXXX
# XXXXXXXXXXXXXXXXXXXXX
# WARNING: If you want to edit this file directly, do not remove any line
# from this file, including this warning. XXXXXXXXXXXXXXXXXXXXXXXXXXX
# XXXXXXXXXXXXXXXXXXXXX
# WARNING: If you want to edit this file directly, do not remove any line
# from this file, including this warning. XXXXXXXXXXXXXXXXXXXXXXXXXXX
# XXXXXXXXXXXXXXXXXXXXX
# WARNING: If you want to edit this file directly, do not remove any line
# from this file, including this warning. XXXXXXXXXXXXXXXXXXXXXXXXXXX
# XXXXXXXXXXXXXXXXXXXXX
# WARNING: If you want to edit this file directly, do not remove any line
# from this file, including this warning. XXXXXXXXXXXXXXXXXXXXXXXXXXX
# XXXXXXXXXXXXXXXXXXXXX
# WARNING: If you want to edit this file directly, do not remove any line
# from this file, including this warning. XXXXXXXXXXXXXXXXXXXXXXXXXXX
# XXXXXXXXXXXXXXXXXXXXX
# WARNING: If you want to edit this file directly, do not remove any line
# from this file, including this warning. XXXXXXXXXXXXXXXXXXXXXXXXXXX
# XXXXXXXXXXXXXXXXXXXXX
# WARNING: If you want to edit this file directly, do not remove any line
# from this file, including this warning. XXXXXXXXXXXXXXXXXXXXXXXXXXX
# XXXXXXXXXXXXXXXXXXXXX
# WARNING: If you want to edit this file directly, do not remove any line
# from this file, including this warning. XXXXXXXXXXXXXXXXXXXXXXXXXXX
# XXXXXXXXXXXXXXXXXXXXX
# WARNING: If you want to edit this file directly, do not remove any line
# from this file, including this warning. XXXXXXXXXXXXXXXXXXXXXXXXXXX
# XXXXXXXXXXXXXXXXXXXXX
# !!!!!!! The file size is 2048 bytes. Don't change the file size !!!!!!!
# XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
</code>
=====config.txt=====
we will make customization through config.txt file, that we will place in root of flash:
<code>
cat config.txt
ROOT=somepasswordhere
DEV=em0
IP=192.168.5.5/24
GW=192.168.5.1
NS=8.8.8.8
</code>
=====customizing sysresccd=====
let us boot from sysresccd

from there we should make following:
<code>
mount /dev/othderdevice_with_posix_fs /mnt/custom/
mkdir -p /mnt/custom/customcd/files
cp -a /livemnt/squashfs/* /mnt/custom/customcd/files/
mount -o bind /dev/ /mnt/custom/customcd/files/dev
mount -t proc proc /mnt/custom/customcd/files/proc
chroot /mnt/custom/customcd/files/
</code>
copy from some i386 debian:
-/usr/bin/expect
-/usr/lib/libexpect.so.5.43.0
-/usr/lib/libtcl8.4.so.0
-/usr/share/tcltk

<code bash>
cat > /root/chpass
#!/usr/bin/expect -f
spawn passwd [lindex $argv 0]
set password [lindex $argv 1]
expect "password:"
send "$password\r"
expect "password:"
send "$password\r"
expect eof
</code>
<code bash>
cat > autorun
#!/bin/sh
PASS=`cat /livemnt/boot/config.txt|grep ROOT|cut -d= -f2`
IP=`cat /livemnt/boot/config.txt|grep IP|cut -d= -f2`
GW=`cat /livemnt/boot/config.txt|grep GW|cut -d= -f2`
NS=`cat /livemnt/boot/config.txt|grep NS|cut -d= -f2`
/sbin/ifconfig eth0 $IP up
echo nameserver $NS > /etc/resolv.conf
/root/chpass root $PASS
/sbin/route add default gw $GW
</code>

/usr/sbin/autorun
<code>
ar_nowait='y'
</code>

/etc/ssh/sshd_config
<code>
PasswordAuthentication yes
</code>

<code>
/usr/sbin/sysresccd-custom squashfs
</code>
/mnt/custom/customcd/isoroot/
=====customizing frenzy=====

let us boot from frenzy

from there we should make following: 
<code>
mkdir /mnt/frenzyfs
mount -t tmpfs tmpfs /mnt/frenzyfs
cp -Rfp /Frenzy/fs/* /mnt/frenzyfs
chroot /mnt/frenzyfs/
</code>

<code>
cat > /root/autorun
#!/bin/sh
/bin/cat /Frenzy/boot/config.txt | /usr/bin/grep ROOT | /usr/bin/cut -d= -f2 | /usr/sbin/pw usermod root -h 0
/bin/echo "PermitRootLogin yes" >> /etc/ssh/sshd_config
/sbin/ifconfig `/bin/cat /Frenzy/boot/config.txt | /usr/bin/grep DEV | /usr/bin/cut -d= -f2` `/bin/cat /Frenzy/boot/config.txt | /usr/bin/grep IP | /usr/bin/cut -d= -f2`
/sbin/route add default `/bin/cat /Frenzy/boot/config.txt | /usr/bin/grep GW |/usr/bin/cut -d= -f2`
/bin/echo "nameserver `/bin/cat /Frenzy/boot/config.txt | /usr/bin/grep NS | /usr/bin/cut -d= -f2`" > /etc/resolv.conf
/etc/rc.d/sshd forcestart

chmod +x /root/autorun
echo /root/autorun >> /etc/rc.d/FRENZY
exit
mkisofs -lRNU -quiet -ldots -o frenzynew.iso frenzyfs
mkuzip -o frenzy.uzip -s 130560 frenzynew.iso 
</code>

now we get new frenzy.uzip, that we will put to /frenzy/ catalog
SukuDokuWiki

User Tools

Site Tools

Page Tools
